Publication 21-CNA-020

Phase-Field Modeling and Peridynamics for Defect Dynamics, and an Augmented Phase-Field Model with Viscous Stresses

Janel Chua
Department of Civil and Environmental Engineering
Carnegie Mellon University
Pittsburgh, PA
songlinc@andrew.cmu.edu

Vaibhav Agrawal
Department of Civil and Environmental Engineering
Carnegie Mellon University
Pittsburgh, PA
vaibhavagrawal31@gmail.com

Timothy Breitzman
Air Force Research Laboratory
timothy.breitzman.1@us.af.mil

George Gazonas
CCDC Army Research Laboratory, Attn: FCDD-RLW-MB
Aberdeen Proving Ground, MD 21005, USA

Kaushik Dayal
Center for Nonlinear Analysis
Department of Civil and Environmental Engineering
Department of Materials Science and Engineering
Carnegie Mellon University
Pittsburgh, PA 15213
Kaushik.Dayal@cmu.edu

Abstract: This work begins by applying peridynamics and phase-field modeling to predict 1-d interface motion with inertia in an elastic solid with a non-monotone stress-strain response. In classical nonlinear elasticity, it is known that subsonic interfaces require a kinetic law, in addition to momentum balance, to obtain unique solutions; in contrast, for supersonic interfaces, momentum balance alone is sufficient to provide unique solutions. This work finds that peridynamics agrees with this classical result, in that different choices of regularization parameters provide different kinetics for subsonic motion but the same kinetics for supersonic motion. In contrast, conventional phase-field models coupled to elastodynamics are unable to model, even qualitatively, the supersonic motion of interfaces. This work identifies the shortcomings in the physics of standard phase-field models to be: (1) the absence of higher-order stress to balance unphysical stress singularities, and (2) the ability of the model to access unphysical regions of the energy landscape.

Based on these observations, this work proposes an augmented phase-field model to introduce the missing physics. The augmented model adds: (1) a viscous stress to the momentum balance, in addition to the dissipative phase-field evolution, to regularize singularities; and (2) an augmented driving force that models the physical mechanism that keeps the system out of unphysical regions of the energy landscape. When coupled to elastodynamics, the augmented model correctly describes both subsonic and supersonic interface motion. The augmented model has essentially the same computational expense as conventional phase-field models and requires only minor modifications of numerical methods, and is therefore proposed as a replacement to the conventional phase-field models.

Get the paper in its entirety as  21-CNA-020.pdf

---

«   Back to CNA Publications